Minimum Requirements for the Argosy Fitting Software
PCs running the Argosy Fitting Software must have at least the following minimum specifications:
If your computer does not meet the above specifications, you should upgrade before installing the Argosy Fitting Software.
- Pentium 90 or greater processor (Pentium 200 or greater recommended)
- 32 MB RAM (64 MB recommended)
- 2 MB Video Card
- CD-ROM Drive
- Hi-Pro System (interface box, firmware version 2.10 or higher, and nine pin RS-232 (serial) cable)
- NOAH Software, version 2.0 or greater
- Argosy Programming Cables\
If you do not have NOAH, a HiPro box, or Argosy Programming Cables, contact your Argosy representative for help obtaining them.
Back To Argosy Fitting Software
© 2000 Argosy Electronics, Inc. All rights reserved. This web site may not be reproduced, in whole or in part, without the express written permission of Argosy.